Big Value in This Interface for Mac, Windows and iOS
The TASCAM Celesonic US-20x20 USB audio interface gives you the
connectivity and versatility you need for a wide range of recording
applications. It includes eight Ultra-HDDA mic preamps, an additional
pair of line inputs, 10 analog outputs, digital expandability, and
built-in DSP for EQ, compression, and reverb. Capture great takes with
up to 24-bit/192kHz resolution, with ultra-fast performance via USB 3.0
(also supports USB 2.0). Connect directly to your iPad or other iOS
device for a studio-like recording experience anywhere. You can even use
the TASCAM Celesonic US-20x20 as a standalone mixer, making it one of
the more flexible interfaces in its class.
TASCAM Celesonic US-20x20 USB 3.0 Audio Interface at a Glance:
- Built-in DSP for EQ, compression, and reverb
- Digital patchbay makes I/O management easier
- Save mixer Scenes for instant recall
Built-in DSP for EQ, compression, and reverb
Make mixing easier on yourself by using the Celesonic US-20x20's
built-in DSP to add EQ and compression to inputs when tracking. Cut out
excessive low end, add some air to dull sources, and prevent clipping
from signal spikes, all without adding any latency. Use the built-in
reverb send to give musicians a better headphone mix. Many recording
engineers at Sweetwater believe in finalizing your sounds as much as
possible when tracking, and the built-in DSP in the TASCAM Celesonic
US-20x20 makes that easier to achieve.
Digital patchbay makes I/O management easier
The TASCAM Celesonic US-20x20 allows you to route any input to any
output, analog or digital. You can also select which outputs the
headphone outs are monitoring. Leave all your gear connected, and simply
re-route your signal flow from within the mixer software.
Save mixer Scenes for instant recall
Once you have your signals routed the way you want and have added EQ,
compression, and reverb to taste, you can save your setup as a Scene
for instant recall. You can save up to 10 Scenes, allowing you to recall
your workflow for tracking, editing, mixing, and any other applications
you need.
TASCAM Celesonic US-20x20 USB 3.0 Audio Interface Features:
- Audio interface for Mac, Windows and iOS, with up to 24-bit/192kHz resolution
- Can be used as an audio interface, 8-channel mic preamp, or as a standalone mixer
- Fast USB 3.0 connectivity (Windows 10 required on PC), also supports USB 2.0
- Dual headphone outputs can independently monitor any outputs
- Expandable via S/PDIF and optical I/O
- 8 Ultra-HDDA mic preamps, plus hi-Z inputs on the first 2 channels for guitar or bass
- Built-in DSP for adding EQ and compression to any input or output, plus a reverb send
- Digital patchbay allows you to route any input to any output
- Comes with 2 sets of ears: angled for desktop use, straight for rackmount use
- USB 3.0 and USB 2.0 cables included
For small- to mid-format recording sessions, the TASCAM Celesonic US-20x20 offers a lot of bang for your buck!
Tech Specs
- Computer Connectivity: USB 3.0
- Form Factor: Rackmount
- Simultaneous I/O: 20 x 20
- Number of Preamps: 8
- Phantom Power: Yes
- A/D Resolution: 24-bit/192kHz
- Built In DSP/FX: Yes, EQ and Compression
- Analog Inputs: 8 x XLR-1/4" combo (2 Mic/Instrument, 6 Mic/Line), 2 x 1/4" TRS
- Analog Outputs: 10 x 1/4" TRS, 2 x 1/4" (headphones)
- Digital Inputs: 1 x Coax (S/PDIF), 1 x Optical (S/MUX)
- Digital Outputs: 1 x Coax (S/PDIF), 1 x Optical (S/MUX)
- MIDI I/O: In/Out
- Clock I/O: In, Thru/Out
- Rack Spaces: 1U
- Manufacturer Part Number: US-20X20
Tidak ada komentar:
Posting Komentar