Jual ISP Technologies Impression Multi-effects Pedal: ISP Technologies Impression Multi-effects Pedal
ISP Technologies Impression Multi-effects Pedal
Price
|
Rp 4.778.000
|
|
|
The
ISP Technologies Impression™ Pedal is a high quality DSP based stereo
multi-effects pro-cessor with Chorus, Delay, Reverb and Flange. Use up
to 3 effects simultaneously including chorus or flange plus delay and
reverb.
The Impression also includes a TAP button allowing easy adjustment of
delay time and chorus or flange modulation time by measuring the time
interval between two taps. Designed to be a perfect match with the THETA
pre-amp pedal, the Impres-sion will deliver a full complement of the
most commonly used effects.
The impression pedal offers ease of use with a direct level and
effects mix level. The Impression pedal can be used in a series or
parallel effects loop of an amplifier or inserted in line after a guitar
preamplifier or distortion pedal. The chorus / flange button will
switch on and off the selected effect; holding down the chorus / flange
button will change the effect from chorus to flange or flange back to
chorus. Two consecutive taps on the TAP button will set the modulation
rate for the chorus or flange. The delay button will turn on and off the
delay effect. Holding the delay button down will change the amount of
regeneration from a single delay to an increasing amount of
regeneration. Two consecutive taps on the TAP button will set the delay
time. The reverb button will turn the reverb effect on and off. Holding
the reverb button down will change the mix of the reverb rela-tive to
the level of the other effects, there are six different preset levels.
This will allow the user to select the desired amount of reverb in the
mix. The Impression pedal uses an external 9VAC power adaptor with an
internal voltage multiplier providing professional headroom with a +/-
15 volt power supply. The Impression incorporates a mono input and left /
right stereo outputs. Add the Impression pedal to your rig and enjoy
the quality effects you have been searching for.
Features
The Impression pedal uses an external 9VAC power adaptor with an
internal voltage multiplier providing professional headroom with a +/-
15 volt power supply and incorporates a mono input and left / right
stereo outputs. Add the Impression pedal to your rig and enjoy the
quality effects you have been searching for.
Specs
Input Impedance – 560k ohms
Maximum Input Level – +11dbu
Maximum Output Level – +11dbu
Dynamic Range – 93db A weighted
Decimator Effective Noise Reduction – 12db
Noise Floor / Mix Level at 1/2 – -90dbu
CHORUS Modulation Time – User Set up to 5 seconds
FLANGE Modulation Time – User Set up to 5 seconds
Maximum DELAY Time – 800 milliseconds
Reverb Mix – User Set from Odb to -21db
Dimensions – 7.4”L x 4.7”W x 1.42”H
Weight – 1.06 lbs
Power – 9VAC External Adaptor
Power Consumption – 200 milliamps at 9VAC |
Bagi
yang ingin berminat memesan barang - barang souns system, karaoke,
lighting, alat musik, cctv & home theater bisa hubungi IMAGINATION
MUSIC STORE di :
HP / WA : 081384476898
Tokopedia : Imagination Music Store
Bukalapak : Imagination Music Store
Tidak ada komentar:
Posting Komentar