Other noise gates have a release knob compromise to adjust the
release response in an attempt to best match the release to your playing
style. With a typical gate, if you set a fast release to remove noise,
the instant you stop playing the long sustained notes will either get an
undesirable cutoff or will chop off the signal with a very ugly
modulated release as the signal decays. The DECI-MATE G provides a fully
adaptive release response, which tracks the envelope of the signal and
instantly changes the release from super fast to a long, smooth release
for sustained notes. The new Decimator X™ technology is based on our new
patent pending “Time Vector Integration” which eliminates any
modulation of the sustained note. This allows long sustained notes to
providing amazingly smooth and transparent release response. Also, the
DECI-MATE G won’t alter your tone. The DECI-MATE G is a full analog
design without any digital artifacts or aliasing for the most
transparent noise reduction available.
In order to fit the additional loop connections and keep the small
package size the loop connections are done via a 3.5MM RTS jack and the
breakout patch cable is included. With the DECI-MATE G, connect all your
high gain pedals in the loop for totally noise free operation
regardless of how much noise your gain pedals create, and then switch to
totally clean without having to adjust the threshold. The DECI-MATE G
can also connect to a series loop of a typical guitar amplifier and
eliminate both the noise from pedals in front of the amp and any
preamplifier gain noise from the guitar amplifier. The new patent
pending Time Vector Integration provides the absolute best release
tracking, for incredibly smooth long sustained note release, and will
instantly adapt for super fast release with quick staccato notes. Don’t
settle for a compromise in performance when you can have the best, most
transparent real time noise reduction available.
Features
- Full Decimator G String in MICRO Pedal package
- Loop INPUT and OUTPUT on 3.5mm TRS / Interface Y cable included
- True Bypass Design
- New DECIMATOR X Technology uses Time Vector Integration.
- Adaptive release provides smoothest release response possible
- Adaptive release tracks both staccato and long sustained notes
- Adaptive tracking response tracks any playing style
- Greater than 90db effective noise reduction
- Superior design to noise gates using downward expansion with adaptive release
- Analog circuit for transparency / no digital aliasing
Specs
Pedal Type : Guitar Noise Reduction
Inputs : 1X Guitar Input ¼ inch
Input Impedance : 500k ohms
Maximum Input Level : +10 dbU
Output : 1X ¼ inch
Maximum Noise Reduction : Greater than 90db
Release Response : Adaptive over 1000 to 1 ratio
True Bypass : Yes
Chassis Size : 3.7 inches x 1.5 inches x 1.3 inches
Power Input : 9VDC 40 milliamp minimum / tip :negative / sleeve : positive
Power Supply Included : NO
Tidak ada komentar:
Posting Komentar