Jual Empress Effects Buffer+ Pedal
Empress Effects Buffer+ Pedal
|
OverviewThe Empress buffer+ was designed to be the complete I/O interface for
the pedal board, while maintaining the highest fidelity to your guitar's
signal.
Signal loss due to long, un-buffered cable runs is an
issue that has plagued guitar players for decades. The primary goal of
the buffer+ is to eliminate this signal loss, ensuring that your tone is
unchanged by your cables.
Additionally, all the connectivity
of your pedal board is consolidated to make set up quick and easy. The
buffer+ also has a very handy set of features that make life just a
little better. Noise filters, input pads, switchable clean boost and
input loading are all powerful tools available on the buffer+
Video
Features- All Analog Signal Path - no digitals in here!
- Small Size - The enclosure measures approximately 4.5" by 2.5" by
1.5", which is delightfully small when considering all the features
packed into this unit.
- Tuner Out - Separate tuner output keeps your tuner out of the audio path.
- Complete I/O - All the connections to your pedalboard consolidated in one place. Makes setup and teardown quick and easy.
- Switchable Boost - Dial in up to 30dB of clean boost and switch on and off with the soft touch foot switch.
- Tuner Mute - Hold the footswitch for a second and mute the amp output for tuning.
- Noise Filters - Similar to Dolby's noise filter technology, choose
between 2 different noise filters to remove any unwanted noise from your
effects chain.
- Input Pad - Pad or boost the input by 3dB. Great for matching
outputs of different guitars, reducing really hot active pickup signal
or boosting the signal to your effects to improve signal to noise ratio.
- Input Loading - Load down your pickups a little, a lot or not at all. It's up to you.
SoundclipsSpecifications
Input Impedance |
10k - 1Meg |
Output Impedance |
510 Ω |
Frequency Response (-3dB) |
5Hz - 40kHz |
Power Input Voltage |
9V DC (Negative tip) |
Power Input Connector |
2.1mm barrel connector (Negative tip) |
Power Consumption |
86mA |
Total Harmonic Distortion |
0.02% |
Signal to Noise Ratio |
105.3dB |
Headroom |
+9.4dBu |
Enclosure Material |
Die Cast Aluminum |
Input connectors |
1/4" Jack |
Output connectors |
1/4" Jack |
Height (enclosure) |
1.25" |
Height with controls |
2" |
Length |
4.5" |
Width |
2.5" |
Weight |
0.5 lbs |
|
Bagi
yang ingin berminat memesan barang - barang souns system, karaoke,
lighting, alat musik, cctv & home theater bisa hubungi IMAGINATION
MUSIC STORE di :
HP / WA : 081384476898
Pin BB : D88A26A3
Tidak ada komentar:
Posting Komentar